Converters

Model No: FT-802

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• 10/100BASE-TX to 100BASE-FX (SC, MM) Bridge Media Converter — 2km
• Duplex mode support:
  • Full or half-duplex mode by auto-negotiation (TP)
  • Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
  • Rear DIP switch: FX duplex mode selection
  • Side DIP switch: LFP (Link Fault Pass-through) mode selection
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Model No: FT-802S15

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter — 15km
• Duplex mode support:
  • Full or half-duplex mode by auto-negotiation (TP)
  • Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
  • Rear DIP switch: FX duplex mode selection
  • Side DIP switch: LFP (Link Fault Pass-through) mode selection
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Model No: FT-803

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• 10/100BASE-TX to 100BASE-FX (MT-RJ, MM) Bridge Media Converter
• Duplex mode support:
  • Full or half-duplex mode by auto-negotiation (TP)
  • Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
  • Rear DIP switch: FX duplex mode selection
  • Side DIP switch: LFP (Link Fault Pass-through) mode selection
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Model No: FT-806A20

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM) Bridge Media Converter — 20km
•  One fiber-optic, 1310nm wavelength: Tx-1310nm, Rx-1550nm
• Duplex mode support:
  • Full or half-duplex mode by auto-negotiation (TP)
  • Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
  • Rear DIP switch: FX duplex mode selection
  • Side DIP switch: LFP (Link Fault Pass-through) mode selection
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Model No: GT-802

• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX
• TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
• 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m 1000BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
• Layer 2 key Features
  • IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets
  • Supports auto MDI/MDI-X function
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate

Model No: GT-802S

• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX
• TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
• 1000BASE-LX: 9/125μm single-mode cable provides long distance for 10km
• Layer 2 key Features
  • IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets
  • Supports auto MDI/MDI-X function
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate

Model No: IGT-2205AT

• 2-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
• 2-port SFP, supporting 100/1000/2500BASE-X transceiver type auto detection
• Automatically detects link status and redundancy on dual ports with the same connector type.
• Only primary port is active at a time, while the backup port is blocked.
• Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
• High-performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Slim IP30 metal case protection
• DIN-rail, wall-mount or side wall-mount design for redundant power design
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature