, , , , , , , ,

Planet ISW-514PTF – Industrial 4-port 10/100TX 802.3at PoE+ plus 1-Port 100FX Ethernet Switch


Available on backorder

Model: ISW-514PTF

  • 4 10/100BASE-TX Fast Ethernet RJ45 copper ports with IEEE 802.3at PoE+ Injector (Port-1 to Port-4)
  • 1 100BASE-FX SFP interface
  • One terminal block for master and slave power input (Power Range: 12 ~ 48V DC redundant power)
  • Hardware-based DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 25-watt PoE transmission distance of 250m at speed of 10Mbps (Only for Port-1 to Port-4).

          Product Availability : On Order Basis, 4-8 Weeks





Available on backorder

Warranty: 36 Months

රු75,591.00 for 3 item(s)

Cost-effective Full PoE+ Power Solution Ideal for Hardened Environment

Featuring Plug and Play designed to be installed in heavy industrial demanding environments, the ISW-514PTF is a PLANET Industrial-grade, DIN-rail type Unmanaged Fast Ethernet PoE+ Switch with 4 10/100BASE-TX ports featuring IEEE 802.3at PoE+, and 1 100BASE-FX fiber optic interface for video uplink.

The ISW-514PTF is designed with redundant power system and is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 120 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP40 metal housing.

Extension of Ethernet Data Transmission Distance 

The ISW-514PTF has a built-in solid DIP switch providing “Standard”, “VLAN” and “Extend” operation modes. By default, the ISW-514PTF operates as a normal IEEE 802.3af/at PoE+ Switch in the “Standard” operation mode.

The “VLAN” operation mode features port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.

In the “Extend” operation mode, the ISW-514PTF operates on a per-port basis at 10Mbps full duplex operation and can support 25-watt  PoE power output over a distance of up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.

Convenient and Reliable Power System 

To facilitate the 802.3at PoE+ usage with commonly used 12~48V DC power input for transportation and industrial-level applications, the ISW-514PTF adopts 12~48V DC to 54V power boost technology to solve power source issue but does not require special power supplies. The ISW-514PTF provides an integrated power solution with a wide range of voltages (12~48V DC) for worldwide operability. It also provides dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications.

Fiber Optic Link Capability for Flexible Distance Extension

The ISW-514PTF is equipped with one 100BASE-FX port, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required.  The distance can be extended from 2 kilometers (multi-mode fiber) to 20/40/60 kilometers (single-mode fiber or WDM fiber). They are suitable for transportation, manufacturing, security and surveillance for long-distance extension without any limitation.

Environmentally Hardened Design

With the IP40 metal industrial case, the ISW-514PTF provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-514PTF can be placed in almost any difficult environment.

Robust Protection

The ISW-514PTF provides contact discharge of ±5KV  DC and air discharge of ±5KV DC for Ethernet ESD protection. It also supports ±5KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.

Safe and Easy PoE Network Deployment

Carrying both Ethernet data and power simultaneously, the ISW-514PTF reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps users to utilize just one Ethernet cable to install and deploy IP camera, wireless AP or VoIP phone more efficiently and cost-effectively.

Hardware Specifications
Fast Ethernet Copper Ports Four 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
PoE Injector Port Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4)
SFP Port One port 100BASE-FX SFP port
Switch Architecture Store-and-Forward
Switch Fabric 1Gbps/non-blocking
Switch [email protected] bytes 0.74Mpps @64 bytes
MAC Address Table 2K entries
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
DIP Switch (Port-1 to Port-4) Standard mode: 30-watt PoE transmit distance of 100m at speed of 10/100Mbps
VLAN mode: “Port-based VLAN Protection” where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports.
Extend mode: 25-watt PoE transmit distance of 250m at speed of 10Mbps
LED Indicators 3 x LED for System and Power:

  • Green: DC Power 1
  • Green: DC Power 2
  • Red: Power Fault Alarm

2 x LED for PoE Copper Port (Port-1~Port-4):

  • Green: LNK/ACT (10/100Mbps)
  • Orange: PoE-in-Use

1 x LED for 10/100TX Copper Port (Port-5):

  • Green: LNK/ACT

4 x LED for PoE Usage

  • Orange
Connector Removable 6-pin terminal block

  • Pin 1/2 for Power 1
  • Pin 3/4 for power fault alarm
  • Pin 5/6 for Power 2
Alarm One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
Power Requirements 12~48V DC, 7A (max.)
Power Consumption/ Dissipation 4.3 watts, 14.6 BTU (Standby without PoE function) at DC 12V power input
72.5 watts, 247.4 BTU (Full loading with PoE function) at DC 12V power input
5 watts, 17 BTU (Standby without PoE function) at DC 24V power input
103.9 watts, 354.5 BTU (Full loading with PoE function) at DC 24V power input
5.3 watts, 18.1 BTU (Standby without PoE function) at DC 48V power input
135.8 watts, 463.4 BTU (Full loading with PoE function) at DC 48V power input
Dimensions (W x D x H) 50 x 85.1 x 135 mm
Weight 598g
ESD Protection 5KV DC
Enclosure IP40 metal case
Installation DIN-rail kit and wall-mount kit
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Output Per port 54V DC, max. 36 watts
PoE Power Budget (max.) 60W @12V DC input
90W @24V DC input
120W @48V DC input
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)


Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    Please prove you are human by selecting the Key.

    Planet ISW-514PTF Datasheet


    You may also like…