-
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, Switches
IGS-6325-8T4X – Industrial L3 8-Port 10/100/1000T + 4-Port 10G SFP+ Managed Ethernet Switch
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, SwitchesIGS-6325-8T4X – Industrial L3 8-Port 10/100/1000T + 4-Port 10G SFP+ Managed Ethernet Switch
Model No – IGS-6325-8T4X
- 8 10/100/1000BASE-T RJ45 copper ports
- 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-X SFP
- One RJ45-to-RS232 console interface for basic management and setup
- Layer 3 IP Routing Features
- Dual power input, redundant power with reverse polarity protection
- DIN-rail and wall-mountable designs
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Product Availability : On Order Basis, 4-8 Weeks
SKU: IGS-6325-8T4X -
Accessories, LAN Switch Accessories - Planet, Planet, SFP Transceivers, SFP/SFP+/QSFP Transceiver - Planet, SFP+
CB-DASFP-0.5M – 10G SFP+ Directly-attached Copper Cable (0.5M in length)
Accessories, LAN Switch Accessories - Planet, Planet, SFP Transceivers, SFP/SFP+/QSFP Transceiver - Planet, SFP+CB-DASFP-0.5M – 10G SFP+ Directly-attached Copper Cable (0.5M in length)
Model No: CB-DASFP-0.5M
- 10G SFP Directly-attached Copper Cable
- 0.5M length
- Complies with the IEEE 802.3ae 10 Gigabit Ethernet Standard
- Complies with standard small form pluggable plus (SFP+) slot
- Plug and Play Installation
Product Availability : On Order Basis, 4-8 Weeks
SKU: CB-DASFP-0.5M -
Accessories, LAN Switch Accessories - Planet, Planet, SFP Transceivers, SFP/SFP+/QSFP Transceiver - Planet, SFP+
CB-DASFP-2M – 10G SFP+ Directly-attached Copper Cable (2M in length)
Accessories, LAN Switch Accessories - Planet, Planet, SFP Transceivers, SFP/SFP+/QSFP Transceiver - Planet, SFP+CB-DASFP-2M – 10G SFP+ Directly-attached Copper Cable (2M in length)
Model No: CB-DASFP-2M
- 10G SFP Directly-attached Copper Cable
- 2M length
- Complies with the IEEE 802.3ae 10 Gigabit Ethernet Standard
- Complies with standard small form pluggable plus (SFP+) slot
- Plug and Play Installation
Product Availability : On Order Basis, 4-8 Weeks
SKU: CB-DASFP-2M
IGS-6325-8T4X – Industrial L3 8-Port 10/100/1000T + 4-Port 10G SFP+ Managed Ethernet Switch
Available on backorder
Model No – IGS-6325-8T4X
- 8 10/100/1000BASE-T RJ45 copper ports
- 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-X SFP
- One RJ45-to-RS232 console interface for basic management and setup
- Layer 3 IP Routing Features
- Dual power input, redundant power with reverse polarity protection
- DIN-rail and wall-mountable designs
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Product Availability : On Order Basis, 4-8 Weeks
10Gbps Fiber Ports and Multiple Dual Speed Ports Deliver High-speed Networking
PLANET IGS-6325 Industrial Layer 3 Managed Non-PoE Switch series features 8 10/100/1000BASE-T copper ports, 4 10GBASE-SR/LR SFP+ ports and Layer 3 IP routing in a rugged IP30 metal case for stable operation in heavy industrial demanding environments.
With 10Gbps uplink, the IGS-6325-8T4X can handle extremely large amounts of data in a secure topology linking to an industrial backbone or high capacity servers. The IGS-6325-8T4X is capable of providing non-blocking switch fabric and wire-speed throughput as high as 96Gbps in the temperature range from -40 to 75 degrees C. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands.
Layer 3 Routing Support
The IGS-6325 Series enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-6325 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 10ms.
Network with Cybersecurity Helps Minimize Security Risks
The IGS-6325 Series comes with enhanced cybersecurity to fend off cyberthreats and cyberattacks. It supports SSHv2, TLS and SSL protocols to provide strong protection against advanced threats. Served as a key point to transmit data over a long-distance fiber optic cable to customer’s critical equipment in a business network, the cybersecurity feature of the IGS-6325 Series protects the switch management and enhances the security of the mission-critical network without any extra deployment cost and effort.
Modbus TCP Provides Flexible Network Connectivity for Factory Automation
With the supported Modbus TCP/IP protocol, the IGS-6325 Series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information, communication status, and DI and DO status, thus easily achieving enhanced monitoring and maintenance of the entire factory.
1588 Time Protocol for Industrial Computing Networks
The IGS-6325 Series is ideal for telecom and carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
Redundant Power to Ensure Continuous Operation
The IGS-6325 DIN-rail series possesses dual DC 12~48V and AC 24V power supply utilized as redundant power supply to ensure its continuous operation. Its redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity.
SMTP/SNMP Trap Event Alert
The IGS-6325 Series provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.
Effective Alarm Alert for Better Protection
The IGS-6325 Series supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time to find where the problem is. It will help to save time and human resource.
Digital Input and Digital Output for External Alarm
The IGS-6325 Series supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the I IGS-6325 Series’ port shows link down, link up or power failure.
IPv6/IPv4 Dual Stack
Supporting both IPv6 and IPv4 protocols, the IGS-6325 Series helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.
Robust Layer 2 Features
The IGS-6325 Series can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the IGS-6325 Series allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well.
Efficient Management
For efficient management, the IGS-6325 Series is equipped with console, Web and SNMP management interfaces.
- With the built-in Web-based management interface, the IGS-6325 series offers an easy-to-use, platform-independent management and configuration facility.
- For text-based management, it can be accessed via Telnet and the console port.
- For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management.
Powerful Network Security
The IGS-6325 Series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.
Advanced IP Network Protection
The IGS-6325 Series also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.
Excellent Traffic Control
The IGS-6325 Series is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission.
Flexible and Extendable 10Gb Ethernet Solution
10G Ethernet is a big leap in the evolution of Ethernet. Each of the 10G SFP+ slots in the IGS-6325 Series supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With its 4-port, 10Gbps and 1Gbps Ethernet link capability, the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The IGS-6325 Series provides broad bandwidth and powerful processing capacity.
Intelligent SFP Diagnosis Mechanism
The IGS-6325 Series supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Hardware Specifications | |
---|---|
Copper Ports | 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP Ports | — |
SFP+ Ports | 4 10GbBASE-SR/LR SFP+ interfaces Compatible with 1000BASE-SX/LX/BX SFP transceiver |
Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 96Gbps/non-blocking |
Throughput | 71.43Mpps@64Bytes |
Address Table | 16K entries, automatic source address learning and aging |
Shared Data Buffer | 32Mbits |
Jumbo Frame | 10K bytes |
SDRAM | 512Mbytes |
Flash Memory | 64Mbytes |
Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND |
Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
Digital Input (DO) | 2 digital input: Level 0: -24~2.1V (±0.1V) Level 1: 2.1~24V (±0.1V) Input load to 24V DC, 10mA max. |
Digital Output (DO) | 2 digital output: Open collector to 24VDC, 100mA |
Enclosure | IP30 aluminum case |
Installation | DIN-rail or wall mounting |
Dimensions (W x D x H) | 76 x 107 x 152 mm |
Weight | 1,250g |
Power Requirements | DC 12~48V, 4A max. AC 24V, 1.5A max. |
Power Consumption | DC input: Max. 10 watts/35BTU (system on) Max. 29 watts/99 BTU (Full loading)AC 24V input: Max. 12 watts/41BTU (system on) Max. 30 watts/103 BTU (Full loading) |
ESD Protection | 6KV DC |
Surge Protection | 4KV DC |
LED Indicators | System: Power 1 (Green), Power 2 (Green) Fault Alarm (Red) Ring (Green), Ring Owner (Green) DIDO (Red) Per 10/100/1000T RJ45 Port: 1000Mbps LNK/ACT (Green) 10/100Mbps LNK/ACT (Amber) Per SFP+ Port: 10Gbps LNK/ACT (Green) 1Gbps LNK/ACT (Amber) |
Layer 2 Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port link capability control |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | TX/RX/Both Many-to-1 monitor |
VLAN | 802.1Q tagged VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) GVRP Up to 256 VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk 14 trunk groups with 12 port per trunk group |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol |
IGMP Snooping | IPv4 IGMP (v1/v2/v3) snooping IPv4 IGMP querier mode support Supports 255 IGMP groups |
MLD Snooping | IPv6 MLD (v1/v2) snooping, IPv6 MLD querier mode support Supports 255 MLD groups |
Access Control List | IP-based ACL/MAC-based ACL ACL based on: – MAC Address – IP Address – Ethertype – Protocol Type – VLAN ID – DSCP – 802.1p Priority Up to 256 entries |
Bandwidth Control | Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps |
QoS | Traffic classification based, strict priority and WRR 8-level priority for switching: – Port number – 802.1p priority – 802.1Q VLAN tag – DSCP/ToS field in IP packet |
Synchronization | IEEE 1588v2 PTP(Precision Time Protocol) – Peer-to-peer transparent clock – End-to-end transparent clock |
Layer 3 Functions | |
IP Interfaces | Max. 128 VLAN interfaces |
Routing Table | Max. 128 routing entries |
Routing Protocols | IPv4 hardware static routing IPv6 hardware static routing OSPFv2 dynamic routing |
Management | |
Basic Management Interfaces | Console; Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces | SSHv1/v2, TLS v1.1/v1.2, SSL, SNMPv3 |
System Management | Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP Remote Syslog System log LLDP protocol NTP PLANET Smart Discovery Utility |
SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A CE: EN55032 EN55035 EN 62368-1/IEC 62368-1: 2014 |
Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3ae 10Gb/s Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ah OAM IEEE 802.1ag Connectivity Fault Management (CFM) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 RFC 2328 OSPF v2 ITU-T G.8032 ERPS Ring ITU-T Y.1731 Performance Monitoring |
Environment | |
Operating | -40 ~ 75 degrees C |
Storage | -40 ~ 85 degrees C |
Humidity | 5 ~ 95% (non-condensing) |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Do you have a question?
Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!
You may also like…
-
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, Switches
IGS-6325-8T8S4X – Industrial L3 8-Port 10/100/1000T + 8-Port 1G/2.5G SFP + 4-Port 10G SFP+ Managed Ethernet Switch
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, SwitchesIGS-6325-8T8S4X – Industrial L3 8-Port 10/100/1000T + 8-Port 1G/2.5G SFP + 4-Port 10G SFP+ Managed Ethernet Switch
Model No – IGS-6325-8T8S4X
- Layer 3 Industrial Managed Ethernet Switch
- 8 port 10/100/1000BASE-T RJ45 copper ports
- 8 port 100/1000BASE-X SFP slots for SFP type auto detection
- 4 port 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-X SFP
- One RJ45-to-RS232 console interface for basic management and setup
- Dual power input, redundant power with reverse polarity protection
- Layer 3 IP Routing Features
Product Availability : On Order Basis, 4-8 Weeks
SKU: IGS-6325-8T8S4X -
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, Switches
IGS-6325-8T8S – Industrial L3 8-Port 10/100/1000T + 8-Port 1G/2.5G SFP Managed Ethernet Switch
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, SwitchesIGS-6325-8T8S – Industrial L3 8-Port 10/100/1000T + 8-Port 1G/2.5G SFP Managed Ethernet Switch
Model No – IGS-6325-8T8S
- Layer 3 Industrial Managed Ethernet Switch
- 8 10/100/1000BASE-T RJ45 copper ports
- 8 100/1000BASE-X SFP slots for SFP type auto detection
- One RJ45-to-RS232 console interface for basic management and setup
- Dual power input, redundant power with reverse polarity protection
- DIN-rail and wall-mountable designs
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Product Availability : On Order Basis, 4-8 Weeks
SKU: IGS-6325-8T8S -
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Network Switches – Non-PoE, Planet, Switches
IGS-6325-20S4C4X – Industrial L3 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Managed Ethernet Switch
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Network Switches – Non-PoE, Planet, SwitchesIGS-6325-20S4C4X – Industrial L3 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Managed Ethernet Switch
Model No – IGS-6325-20S4C4X
- Layer 3 Industrial Managed Ethernet Switch
- 20 100/1000BASE-X mini-GBIC/SFP slots
- 4 10/100/1000BASE-T RJ45 ports, shared with Port-1 to Port-4
- 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
- RJ45 to RS232 console interface for basic management and setup
- Layer 3 IP Routing Features
- 19-inch rack-mountable design
- IP30 metal case
- Active-active redundant power failure protection
Product Availability : On Order Basis, 4-8 Weeks
SKU: IGS-6325-20S4C4X -
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, Switches
IGS-6325-20T4C4X – Industrial L3 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Managed Ethernet Switch
Industrial Layer 3 Managed - Planet, Industrial Network Switches, Industrial Switches - Planet, Industrial Switches – Non PoE, LAN Switches - Planet, Layer 3 Managed - Planet, Layer 3 Managed Ethernet Switches, Layer 3 Managed Switches - 10G or Higher, Planet, SwitchesIGS-6325-20T4C4X – Industrial L3 20-Port 10/100/1000T + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Managed Ethernet Switch
Model No – IGS-6325-20T4C4X
- Industrial Layer 3 Managed Ethernet Switch
- 24-port 10/100/1000BASE-T RJ45 copper
- 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100BASE-FX SFP
- 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
- RJ45 to RS232 DB9 console interface for basic management and setup
- Layer 3 IP Routing Features
- Active-active redundant power failure protection
- 19-inch rack-mountable design
- IP30 metal case protection
- 40 to 75 degrees C operating temperature
Product Availability : On Order Basis, 4-8 Weeks
SKU: IGS-6325-20T4C4X
There are no reviews yet.