Available on backorder
Model No: ENS610EXT
Dual Band AC1300 Outdoor Long Range Wireless Access Point
ENS610EXT equips with two powerful RF interfaces that support up to 867 Mbps in 5GHz frequency band and 400 Mbps in 2.4GHz frequency band (with 2ss/VHT40 clients). With robust IP55 certified casing, this access point is designed to withstand harsh environment conditions including serve and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity.
| Wireless Radio Specification
Access Point Type: Outdoor, IP55, dual radios concurrent, 5GHz 802.11 ac 2×2 MIMO is backwards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2×2 MIMO is backwardscompatible with 802.11 b/g. SU-MIMO: Two(2) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device. MU–MIMO Two(2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) wireless client devices simultaneously. Frequency Radio 2.4GHz: 2400MHz ~ 2835MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. Supported Radio Technology 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 2×2 MIMO with 2 streams 802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz 802.11n supports high throughput (HT) —HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac packet aggregation: AMPDU, ASPDU Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit Power (Maximum Value) 2.4GHz: 23dBm 5GHz: 23dBm Maximum power is limited by regulatory domain Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance. Supported data rates (Mbps) 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2) Power Maximum Power Consumption TBD Power Source Proprietary 24V PoE (Power: 4, 5; Return: 7, 8) Antenna SMA Type interfaces 2.4GHz: Two(2) detachable 5.0dBi SMA antennas 5GHz: Two(2) detachable 5.0dBi SMA antennas Optional Solutions Alternative solution to compatible with SA2216 and SA5219 sector Antennas. Interfaces Networking Interface Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports Link Aggregation achieves 2Gbps Throughput LED Indicators Display system and wireless transmission status Reset Button Convert Access Point to the Factory default or the Users Default |
Mounting
Pole Mounting Assemble a mounting bracket to fix this Access Point on a pole. Wall Mounting Mount this Access Point on a flat wall Mechanical & Environment Dimensions (Device only) 186mm (L) x 100mm (W) x 29mm (H) (7.54” x 4.49” x 1.88”) Weight TBD Operating Temperature: -20°C~60°C (-4°F~140°F) Humidity: 0%～90% typical Storage Temperature: -30°C~80°C (-22°F~176°F) Humidity: 0%～90% typical Environment Protection Level IP55 Surge Protection 1KV ESD Protection Contact: 4KV Air: 8KV Compliance Regulatory FCC Subpart15 B Subpart C 15.247 Subpart E 15.407 CE EN 300 328 EN 301 893 EN 50385 EN 60601-1-1 EN 60601-1-2 EN 55032 EN 55024 R&TTE Directive 1995/5/EC CB IEC 60950-1 IEC 60950-22 S–Mark UL 60950-1 |
Only logged in customers who have purchased this product may leave a review.
Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!
Model No: UAP-AC-M-PRO
Model No: UAP-AC-M
*Note – PoE Injector included
Model No: UAP‑AC‑SHD
Model No: NHD-cover-Black-3
The UniFi nanoHD AP covers allow the nanoHD AP to integrate into a wide variety of backgrounds. Whether you are mounting your AP against a marble, concrete, or wood backdrop, the UniFi nanoHD AP will blend in seamlessly.
There are no reviews yet.