, , , , , , ,

Planet LRP-201ET


Model No: LRP-201ET

  • Eliminates power cabling with PoE over coaxial/UTP/telephone wire
  • Power and Ethernet data transmission over coaxial up to 600m
  • Power and Ethernet data transmission over UTP wire up to 400m
  • Power and Ethernet data transmission over telephone wire up to 300m
  • Complies with IEEE 802.3at/bt Power over Ethernet PD on RJ45 port
  • Supports PoE Power up to 60 watts (depending on power source and cable distance)
  • Auto detects remote PD
  • Plug and Play with no configuration required


Warranty: 36 Months

PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote ultra PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.

Powerful PoE over Coaxial/UTP Extender
e LRP-201ET, a PLANET Long Reach PoE solution, is an Industrial Single-port 10/100/1000T Ultra PoE over Coaxial/UTP Extender featuring long range data and power transmission over any existing coaxial, UTP cable or telephone wire for distance up to 600 meters (1,968ft.) and converts power to IEEE 802.3at/bt PoE over another 100-meter Ethernet cable connected to the remote PoE PD. The LRP-201ET provides multi applications for easy Plug and Play operation and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C. It makes the installation of remote PoE PDs easier and more efficient.

IP Ethernet and Power over Long Existing Coaxial/UTP Cable
A normal UTP cable can only be extended up to 100 meters, but with the LRP-201ET, when functioning with the LRP-201HT, the distance for PoE networking can be extended up to 600 meters (1,968ft.) over 75 ohm coaxial cable or up to 400 meters (1,312ft.) over UTP with stable, high-quality video transmission. It eliminates the need for additional remote site power while allowing a single power source to provide power to both LRP extenders and the PoE PD at long range.

Securing Network Connection with 128-bit AES Encryption
Simply by pressing the PAIR button on the LRP-201HT and LRP-201ET, users can easily set up a hassle-free, secure network within minutes. When the PAIR LED turns on, it provides 128-bit AES encryption for network security and data protection.

Plug & Play Installation
With the Plug and Play feature, the LRP-201ET can be used immediately without the need of configuration and is also compliant with all kinds of IP network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of the individual port and the whole system, enabling the administrator to efficiently manage the network.

Hardware Specifications
Ethernet Interface Copper
10/100/1000BASE-T RJ45
Auto-negotiation/ Auto-MDI/MDI-X
Power over Ethernet Standard
IEEE 802.3at/bt PoE PSE
PoE Output
56V DC, 1.2A max.
PoE Budget
Up to 60 watts
PoE Mode
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Data Rate
Cat. 5e or above
Maximum Distance
100 meters
Maximum Frame sizes
Long Reach PoE Interface* Connectivity
1 x RJ45 female connector
Long Reach PoE over UTP PD
1 x BNC female connector
Long Reach PoE over coaxial PD
Power Input
40~54V DC
Power Pin Assignment
– BNC center pole: DC+
– BNC shield: DC-
– RJ45 Pins 1, 3, 5, 7: VCC+
– RJ45 Pins 2, 4, 6, 8: VCC-
– Coaxial cable: 75 ohm
– RG-6/U cable, less than 12Ω/1000 ft.
– RG-59/U cable, less than 30Ω/1000 ft.
– Cat. 5e/6 UTP cable
– EIA/TIA-568 100-ohm STP
Maximum Distance
– Max. 200m with PoE++ output (656ft.)
– Max. 400m with PoE+ output (1312ft.)
– Max. 600m with PoE output (1,968ft.)
– Max. 100m with PoE++ output (328ft.)
– Max. 200m with PoE+ output (656ft.)
– Max. 300m with PoE output (984ft.)
– Max. 400m with PoE output (1,312ft.)
Long Reach Ethernet Standard
ITU-T G.hn
Modulation Type
128-bit AES encryption
Frequency Band
1 ~ 100 MHz
Multiple nodes
Supports up to 2 LRP extenders within 0.6km
LRP Compatibility
LRP-201HT- 1-Port LRP Injector
LRP Coaxial Performance
Distance Data Rate
(Upload / Download)
48V DC Input 60W PoE++ Input
200m 477/471 Mbps 41W 34W
400m 239/234 Mbps 16W 22W
600m 107/98 Mbps 6W 8W
LRP UTP Performance
Distance Data Rate
(Upload / Download)
48V DC Input 60W PoE++ Input
100m 407/415 Mbps 59W 40W
200m 268/270 Mbps 55W 36W
300m 134/146 Mbps 34W 28W
400m 75/83 Mbps 24W 23W
LED Indicators – PWR
– PoE-in-Use
ESD Protection 6KV DC
PAIR Button Press for 3 sec to join LRP-201HT
Reset Button Press over 10 sec to return to factory default
Enclosure IP30 slim type metal case
Installation DIN-rail kit or wall-mount ear
Dimensions (W x D x H) 135 x 87.8 x 32 mm
Weight 510g
Power Requirements – BNC Power over Coaxial Input: 40~54V DC, 1.8A max.
– RJ45 Power over Ethernet Input: 40~54V DC, 1.8A max.
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet Type 3
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Temperature Operating: -20~70 degrees C
Storage: -30~75 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Standard Accessories
Package Contents – LRP-201ET
– User’s Manual
– Wall-mount Kit
– RJ45 Dust Cap x 2
– Warning Sticker

*Please do not connect any Ethernet device to LRP IN Port of the LRP-201ET; otherwise, it will damage the Ethernet device.

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    Please prove you are human by selecting the Car.

    LRP-201ET Datasheet


    You may also like…