, , , , , , ,

ISW-501T – 5-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature)

Planet
Availability:

Available on backorder


Model: ISW-501T

  • 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half/full-duplex mode
  • High-performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (switching fabric): 1Gbps
  • Integrated address look-up engine, supporting 1K absolute MAC addresses
  • Automatic address learning and address aging

          Product Availability : On Order Basis, 4-8 Weeks

රු17,286.00

Available on backorder

Warranty: 36 Months

Slim Type with more Practicability and Convenience

PLANET ISW-501T, an Industrial 5-port Fast Ethernet Switch, provides non-blocking wire-speed performance in a harsh industrial environment. It also provides 5-port 10/100BASE-TX RJ45 copper interfaces delivered in an IP30 rugged, strong case with the redundant power system. Its slim case is suitable for such applications as surveillance system deployments, control management and wireless service in climatically demanding environments with a wide temperature range from -40 to 75 degrees C.

Energy Saving with Lower Power Consumption

The ISW-501T, adopting the advanced green networking technology, provides the IEEE 802.3az protocol based power saving. This feature makes the ISW-501T consume very low power in full-load operation mode, which helps conserve energy effectively but maintains high performance efficiently.

Stable Performance under Difficult Environments

The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with a wide range of voltages (12 to 48V DC, 24V AC) for worldwide high availability applications requiring dual or backup power inputs.

Robust Switch Performance

Built-in a high-performance switch architecture, the ISW-501T comes with five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps, and the 1K MAC address. Thus, the ISW-501T can transfer wire-speed packets without the risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer.

All of the RJ45 copper interfaces in the ISW-501T support 10/100Mbps auto-negotiation for optimal speed detection through RJ45 Category 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

Hardware Specifications
10/100BASE-TX Auto MDI/MDIX Ports5
LED Indicators3 x LED for System and Power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Green: Power Fault1 x LED for each Copper Port
■ Green: 10/100 LNK/ACT
EnclosureIP30-rated metal case
Dimensions (W x D x H)135 x 87 x 32 mm
Weight400g
ESD Protection6KV DC
EFT Protection6KV DC
Power Requirements12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption/Dissipation1.6 watts/5.4BTU
InstallationDIN rail kit and wall-mount ear
AlarmProvides one relay output for power failure
Alarm relay current carry ability: 3A @ DC 30V
ConnectorRemovable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Switch Specifications
Switch Processing SchemeStore-and-Forward
Address Table1K
Buffer MemoryEmbedded 448K bits packet buffer
Flow ControlBack pressure for half duplex,
IEEE 802.3x pause frame for full duplex
Switch Fabric1Gbps
Throughput (packet per second)0.74Mpps
Network Cables10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters
100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
Standards Conformance
Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
TemperatureOperating: -40~75 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5% to 95%, Storage: 5% to 95% (non-condensing)
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC60068-2-32 (free fall)
IEC60068-2-27 (shock-proof)
IEC60068-2-6 (vibration-proof)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the House.

    Planet ISW-501T Datasheet

    Download

    You may also like…