, , , , ,

IPOE-E174 – Industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender

Planet
Availability:

Available on backorder


Model No – IPOE-E174

  • Industrial Power over Ethernet Extender
  • Five 10/100/1000BASE-T Gigabit RJ45 interfaces
  • 4- port Data + Power output, 1-port data + power input
  • Complies with ultra Power over Ethernet end-span and mid-span PD
  • Plug and Play installation
  • DIN rail and wall-mount design
  • IP30 metal case
  • -40 to 75 degrees C operating temperature

          Product Availability : On Order Basis, 4-8 Weeks

PoE Solution for Long-reach Distance

PLANET IPOE-E174 is an industrial 1-Port Ultra PoE (IEEE 802.3bt) to 4-Port 802.3af/at Gigabit PoE Extender designed especially for the point to multipoint PoE application. The IPOE-E174 can obtain a maximum of 75-watt PoE power from ultra PoE (IEEE 802.3bt) input port and supplies a maximum of 60-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 200m where up to 4 powered devices (PDs) can be powered at the same time. The IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Environmentally Hardened Design

With industrial-grade IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-E174 can be placed in almost any difficult environment.

Intelligent LED Indicator for Real-time PoE Usage

The IPOE-E174 helps users to monitor the current status of PoE power usage easily by its advanced LED indication. Called “PoE Power Usage” shown in percentage, the front panel of the IPOE-E174 has three LEDs indicating 2040 and 60 watts of PoE power usage. With these LED indications, you can monitor the PoE power status of the IPOE-E174 efficiently.

Plug and Play, Easy Cabling Installation

The IPOE-E174 can be easily installed by way of Plug and Play. It is used between a Power Source Equipment (PSE) and the PD. The IPOE-E174 injects power to the PD without affecting the data transmission performance. The IPOE-E174 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is designed in a compact box containing 5 RJ45 ports, of which 1 “PoE IN” port functions as PoE (Data and Power) input and 4 “PoE OUT” ports on the other side functions as PoE (Data and Power) output. The “PoE OUT” port is also the power injector where DC voltage is transmitted over Cat. 5/5e/6 cable, and data and power are simultaneously transferred between the PSE and PD.

Hardware Specifications
Hardware Version 2
Network Connector PoE In Port
1 x 10/100/1000BASE-T Ethernet with ultra PoE “Data + DC” in, auto
MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC”
out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture Store-and-Forward switch architecture
MAC Address Table 2K MAC address table with auto learning function
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64Bytes
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9Kbytes
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN rail kit and wall-mount ear
Cable Twisted-pair cable :
■ 10BASE-T: 2-pair UTP Cat. 3, 4, 5 up to 100 meters
■ 100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
■ 1000BASE-T: 4-pair UTP Cat. 5e, 6 up to 100 meters
Dimensions (W x D x H) 32 x 85 x 135 mm
Weignt 424g
Power Consumption 4.1 watts/13.9 BTU (Power On)
64.7 watts/220.6 BTU (Full PoE loading without data transfers)
66.1 watts/225.4 BTU (Full loading with PoE function)
LED Display System: PWR (Green)
Power Input: 30W, 2-pair 802.3at PoE in (Green)
Power Input: 60W+, 4-pair 802.3bt, Ultra PoE or UPOE in (Green)
PoE Power Usage: 20W, 40W and 60W
PoE Input Port: LNK/ACT (Green)
PoE Input Port: PoE in (Orange)
Per PoE Output Port: LNK/ACT (Green)
Per PoE Output Port: PoE-in-Use (Orange)
Power over Ethernet
PoE Standard PoE In Port
IEEE 802.3at High Power over Ethernet end-span/mid-span class 4 PD
Per PoE Out Port
IEEE 802.3at High Power over Ethernet end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power PoE In Port
50~57V DC, max. 72 watts
Per PoE Out Port
44~55V DC, max. 30.8 watts
Power Pin Assignment PoE In Port
1/2(+), 3/6(-); 4/5(+), 7/8(-)
Per PoE Out Port
1/2(+), 3/6(-)
Compatible PoE Injectors POE-171A-60
POE-171A-95
IPOE-171-60
IPOE-171-95
PoE Power Budget 64 watts (max.) @ PoE Type 3 input (Ultra PoE input)
30 watts (max.) @ PoE Type 2 input (802.3at input)
15 watts (max.) @ PoE Type 1 input (802.3af input)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Higher Power over Ethernet
Environment
Operating Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the plane.

    Planet IPOE-E174 Datasheet

    Download

    You may also like…