, , , , , , , ,

IGS-501T – 5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)

Planet
Availability:

Available on backorder


Model: IGS-501T

  • 5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function
  • Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full-duplex mode
  • High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (switching fabric): 10Gbps
  • Integrated address look-up engine, supporting 2K absolute MAC addresses
  • 1M bits on-chip buffer memory
  • 9K Jumbo packet size support
  • Automatic address learning and address aging

         Product Availability : On Order Basis, 4-8 Weeks

 

රු24,110.00

Available on backorder

Warranty: 36 Months

Slim Type with More Practicability and Convenience

The IGS-501T advanced, slim-type, industrial, hardened Gigabit Ethernet Switch with IP30 metal case consists of 5 10/100/1000Mbps auto-negotiation ports and thus, it operates reliably in heavy industrial demanding environments.
Its compact IP30 standard metal case features either DIN rail or wall mount for the efficient use of cabinet space.

Stable Performance under Difficult Environments

The IGS-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C coupled with hazardous location certification (Class 1 Division 2), the IGS-501T can be placed in almost any difficult environment. The IGS-501T also possesses an integrated power supply source with a wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Plug and Play

All of the RJ-45 copper interfaces in the IGS-501T support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Hardware Specifications
Hardware Version4
Copper Ports5 x 10/100/1000Base-T RJ45 TP
auto-MDI/MDI-X, auto-negotiation
ConnectorRemovable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
AlarmProvides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
LED3 x LED for system and power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Green: Power Fault
2 x LED for each copper port
■ Green: 1000Mbps LNK/ACT
■ Orange:10/100Mbps LNK/ACT
ESD Protection6KV
EFT Protection6KV
Power Requirements12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation5.28 watts/18BTU
InstallationDIN rail kit and wall-mount ear
EnclosureIP30 metal case
Dimensions (W x D x H)32 x 87 x 135 mm
Weight456g
 

Switch Specifications

Switch Processing SchemeStore-and-Forward
Address Table2K entries
Buffer Memory1M bits on-chip buffer memory
Flow ControlBack pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric10Gbps
Throughput (packet per second)7.4Mpps @64bytes
Jumbo Frame9K
Network Cables10/100/1000Base-T
Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)]
EIA/TIA-568 100-ohm STP [100 meters (max.)]
Standards Conformance
Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
Regulation ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Environment
TemperatureOperating: -40~75 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5~90%
Storage: 5~90% (non-condensing)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the Cup.

    Planet IGS-501T Datasheet

    Download

    You may also like…