, , , ,

NMC-RP24UD2-HU-BK – Slim Type Unshielded patch panel, 24 ports, 19 “, 0.5U, Category 5e


Available on backorder

Model No: NMC-RP24UD2-HU-BK

  • Packing Option – 1 in Сardboard Box
  • Contacts with 50 micro-inches gold plating: not less than 750 connecting cycles
  • Color scheme of wiring according to two standards: T568 A and B
  • All ports are numbered, additional areas available for marking
  • Built-in cable organizer
  • Universal IDC contacts for 110 / Krone type

Standard Warranty (Non-Certified) – 5 Years

System Warranty (Certified) – 25 Years


Available on backorder

Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX NMC-RP24UE2-HU-BK (Cat.6) and NMC-RP24UD2-HU-BK (Cat. 5e), high-density panels with unshielded housings are intended for installation in 19’’ cabinets and racks. These panels contain 24 port RJ45 / 8P8C at a height of only 0.5 U. This solution is ideal when it is necessary to provide a high port density (e.g., data centers) or to extend the network in the limited space of the cabinet. Universal IDC contacts for 110 / KRONE type knives are located on the rear side of panels . There are two wiring standards: T568 A and B. A built-in organizer for reliable cable fixing.


Bandwidth, MHz


Connection style



Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C

Individual packing

Cardboard box


5 years – extended; 25 years – as part of the NIKOMAX SCS certified

Number of ports


Height, U


Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)


Layout diagram


IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, meets UL94V-0


All ports are numbered, there are additional labeling area


19’’ Cabinet or rack

Depth in rack, mm


Material of the supporting structure

Steel 1.5 mm



Insulation resistance

Not less than 500 M ohms (at constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)


Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    Please prove you are human by selecting the Cup.

    NMC-RP24UD2-HU-BK Datasheet