Shielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX NMC-RP24SA2-1U-MT (Cat. 6A), NMC-RP24SE2-1U-MT (Cat.6) and NMC-RP24SD2-1U-MT (CAT5) patch panels are made in stainless steel, fully shielded enclosures. They are designed for installation in 19 ‘‘ cabinets and racks. The panels have a standard height of 1U and can accommodate 24 port RJ45 / 8P8C. Universal IDC contacts for 110 / KRONE type knives are located on the rear side of panels . There are two wiring standards: T568 A and B. Shielded cable are grounded in pairs on the screw terminals. The cassette provided the 9th ground to IDC-contact – speci cally for the drain wire of the cable which both sides of the PCB have a common ground bus. For better shielding against electromagnetic interference and improve communication with unpainted rails cabinet, steel body panels are galvanized with nickel. A built-in organizer for secure fastening of cables.
NMC-RP24SE2-1U-MT – STP Patch Panel 24 Ports, Cat.6, 110/KRONE Type,1U
Available on backorder
Model No: NMC-RP24SE2-1U-MT
- Packing Option – 1 in Сardboard Box
- Contacts with Gold (50 micro-inches) over nickel (100 micro-inches)
- Color scheme of wiring according to two standards: T568 A and B
- Fully shielded version, nickel-plated housing
- All ports are numbered, additional areas available for marking
- Built-in cable organizer
- Grounding wire for grounding to the common rail of the cabinet
- Universal IDC contacts for 110 / Krone type
Standard Warranty (Non-Certified) – 5 Years
System Warranty (Certified) – 25 Years
| Weight | 1.44 kg |
|---|---|
| Dimensions | 51 × 11 × 8 cm |
| Category |
6 |
| Bandwidth, MHz |
250 |
| Diameter of conductors, AWG |
~24-22 AWG (0.50-0.65 mm) |
| Connection style |
Fully shielded |
| Compliance |
Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2 |
| Supported applications |
10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6), |
| Temperature ranges |
Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C |
| Individual packing |
Cardboard box |
| Warranty |
5 years – extended; 25 years – as part of the NIKOMAX SCS certified |
| Number of ports |
24 |
| Height, U |
1 |
| Connector type |
RJ45/8P8C |
| Connector material in connector |
Phosphor bronze |
| Contact coating material |
Gold (50 micro-inches) over nickel (100 micro-inches) |
| Number of cable connections |
Not less than 750 |
| Type of IDC contacts (seal) |
110/KRONE |
| Layout diagram |
T568A/B |
| IDC Contact material |
Phosphor bronze |
| IDC coating material |
Tin (100 micro-inches) |
| Plastic material |
High-strength, non- flammable, meets UL94V-0 |
| Marking |
All ports are numbered, there are additional labeling area |
| Installation |
19″ Cabinet or rack |
| Depth in rack, mm |
100 |
| Material of the supporting structure |
Galvanized steel: body – 1.5mm; cover – 1 mm. |
| Color |
Metallic (Nickel) |
| Insulation resistance |
Not less than 500 M ohms (at constant voltage of 100 V) |
| Maximum load-bearing capacity |
Up to 1000 V, 60 Hz for 1 minute |
| Contact resistance, μΩ |
Not more than 20 |
| IDC Contact resistance, μΩ |
Not more than 2.5 |
Do you have a question?
Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!
