, , , ,

NMC-RP24SA2-1U-MT – Shielded patch panel, 24 ports, 19 “, 1U, Category 6A


Available on backorder

Model No: NMC-RP24SA2-1U-MT

  • Packing Option – 1 in Сardboard Box
  • Contacts with 50 micro-inches gold plating: not less than 750 connecting cycles
  • Color scheme of wiring according to two standards: T568 A and B
  • Fully shielded version, nickel-plated housing
  • All ports are numbered, additional areas available for marking
  • Built-in cable organizer
  • Grounding wire for grounding to the common rail of the cabinet
  • Universal IDC contacts for 110 / Krone type

Standard Warranty (Non-Certified) – 5 Years

System Warranty (Certified) – 25 Years

Shielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX NMC-RP24SA2-1U-MT (Cat. 6A), NMC-RP24SE2-1U-MT (Cat.6) and NMC-RP24SD2-1U-MT (CAT5) patch panels are made in stainless steel, fully shielded enclosures. They are designed for installation in 19 ‘‘ cabinets and racks. The panels have a standard height of 1U and can accommodate 24 port RJ45 / 8P8C. Universal IDC contacts for 110 / KRONE type knives are located on the rear side of panels . There are two wiring standards: T568 A and B. Shielded cable are grounded in pairs on the screw terminals. The cassette provided the 9th ground to IDC-contact – speci cally for the drain wire of the cable which both sides of the PCB have a common ground bus. For better shielding against electromagnetic interference and improve communication with unpainted rails cabinet, steel body panels are galvanized with nickel. A built-in organizer for secure fastening of cables.

Weight 1.631 kg
Dimensions 51.0 × 11 × 8 cm


Bandwidth, MHz


Diameter of conductors, AWG

~24-22 AWG (0.50-0.65 mm)

Connection style

Fully shielded


Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Cardboard box


5 years – extended; 25 years – as part of the NIKOMAX SCS certified

Number of ports


Height, U


Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)


Layout diagram


IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non- flammable, meets UL94V-0


All ports are numbered, there are additional labeling area


19″ Cabinet or rack

Depth in rack, mm


Material of the supporting structure

Galvanized steel: body – 1.5mm; cover – 1 mm.


Metallic (Nickel)

Insulation resistance

Not less than 500 M ohms (at constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    Please prove you are human by selecting the star.

    NMC-RP24SA2-1U-MT Datasheet