General
|
Description |
Cisco ASR 9010 chassis, ASR-9010-DC, ASR-9010 DC chassis |
Cisco ASR 9010 Specs |
Physical specifications |
Height: 36.75 in. (933.45 mm) (21 RU)
Width: 17.38 in. (441.45 mm)
Depth:
● With doors: 29.03 in. (737.4 mm)
● Without doors: 28.24 in. (717.3 mm)
Weight:
● 155.6 lb (70.73 kg) (chassis with PEM)
231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) – RSP, two v2 fan trays, PEMs |
Slot orientation |
Vertical |
Cisco ASR 9000 Series RSP |
Dual redundant RSPs with integrated fabric in 2 slots |
Cisco ASR 9000 Series line cards |
8 line-card slots |
“Commons” components |
2 RSPs
2 fan trays
2 PEMs (either DC or AC)
1 fan filter |
Reliability and availability |
Fabric redundancy
Fan redundancy
Feed redundancy
Power-supply redundancy
RSP redundancy
Software redundancy |
Rack mounting |
19-in. default
21- and 23-in. adapters available
Note: Minimum 17.75-in. opening between posts is needed for proper operation |
Cabinet mounting |
Yes
Note: Doors not recommended in enclosed cabinets |
Wall mounting |
No |
Airflow |
Front-to-back |
Performance |
Fabric |
One per RSP:
● Active/active nonblocking operation mode in dual-RSP redundant configuration
● Fully redundant in dual-RSP redundant configuration
● Built-in service-intelligence and traffic-prioritization capability |
Thermal |
Two fan trays:
● 12 high-efficiency fans per tray
● Variable-speed fans for optimal thermal performance
● No single point of failure |
Modularity |
Pay-as-you-grow power for future scalability, available in AC and DC.
Multiple power module types:
● 6 kW and 3 kW AC power modules
● 4.4 kW and 2.1 kW DC power modules
Note: Mixing of AC and DC modules is not supported |
Redundancy |
● AC: N+N redundancy
● DC: N+1 redundancy
● Power module redundancy
● A/B Feed redundancy
● PEM redundancy |
Power zones |
No power zone restrictions
Fully load-sharing power infrastructure |
Power input |
Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)
Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) |
Power-module airflow |
Front-to-back |
Environmental Specifications |
Operating temperature (nominal) |
41 to 104ºF (5 to 40ºC) |
Operating temperature (short-term) |
ASR 9006: 23 to 131ºF (-5 to 55ºC)
ASR 9010: 23 to 122ºF (-5 to 50ºC) |
Operating humidity (nominal) (relative humidity) |
5 to 90% |
Storage temperature |
-40 to 158ºF (-40 to 70ºC) |
Storage (relative humidity) |
5 to 93% |
Operating altitude |
-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
Regulatory Compliance |
Network Equipment Building Standards (NEBS) |
Cisco ASR 9010 Routers are designed to meet:
● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
● VZ.TPR.9205: Verizon TEEER |
ETSI standards |
Cisco ASR 9010 Routers are designed to meet:
● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1 |
EMC standards emission |
Cisco ASR 9010 Routers are designed to meet:
● FCC Class 47CFR15 A
● ICES 003 Class A
● AS/NZS CISRP22 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● BSMI Class A
● IEC/EN 61000-3-12: Power Line Harmonics
● IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
● EN55022: Information Technology Equipment (Emissions)
● EN 50121-4: Railway EMC |
EMC standards immunity |
Cisco ASR 9010 Routers are designed to meet:
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Surge Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
● EN 50121-4: Railway EMC |
Safety |
Cisco ASR 9010 Routers are designed to meet:
● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA Code of Federal Regulations Laser Safety |
There are no reviews yet.