, , , ,

Planet WS-1232P

Planet

Model No: WS-1232P

  • 8-port 10/100/1000BASE-T with 36W PoE injector
  • 2-port 1/10G BASE-X SFP+
  • RS-232 RJ45 console interface for switch basic management and setup
  • Dashboard: provides at-a-glance view of system and wireless network status
  • AP Discovery: one key to discover the managed APs on the managed LAN
  • Customized Profile: allows multiple wireless profiles creation and maintenance
  •  Auto Provision: multi-AP provisioning with one click
  • Cluster Management: simplifies high-density AP management
  • Zone Plan: optimizes AP deployment with actual signal coverage
  •  Analysis: real-time AP status monitoring
  • Scalability: free system upgrade and AP firmware bulk upgrade capability
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports

රු135,677.00

Warranty: 24 Months

Wireless Management Solution with PoE

PLANET WS-1232P, an enhanced Wireless AP Managed Switch, features Smart AP controlLayer 3 OSPF/static routing and Intelligent PoE capability to enable service providers and IT managers to control all wireless APs at the same time in small- and medium-scale wireless network environments, such as hotels, villas, resorts and any public area. The WS-1232P provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 8 10/100/1000BASE-T ports featuring up to 36-watt 802.3at PoE+, 2 additional Gigabit copper ports and another 2 extra 1/10 Gigabit BASE-X SFP+ fiber slots which definitely offer enterprises a quick, safe and cost-effective AP Control with Power over Ethernet network solution.

Five Steps to Manage AP Cluster within Minutes

The WS-1232P offers a user-friendly Web GUI for easy configuration. It features centralized management of PLANET Smart AP series without needing to manually configure each AP for the wireless SSID, radio band and security settings. With a five-step configuration process, different purposes of wireless profiles can be simultaneously delivered to multiple APs or AP groups to minimize deployment time, effort and cost.

Visualizing Wi-Fi Signals through Map

Importing your floor maps and locating each AP or AP group according to the field deployment can save your time and cost of on-site support and monitoring. It shows real-time AP status, and its signal heat map is capable of reflecting the actual coverage and helps the administrator to fine-tune the overlapping of the adjacent APs anytime to optimize the wireless network performance.

Maximal Scalability and Compatibility with Various Smart APs

To fulfill various business needs, the WS-1232P provides maximum scalability and is compatible with over 10 models of Smart APs from indoor to outdoor series including ceiling-mount, wall-mount, in-wall, industrial, single-band, dual-band and high-power access points which are able to adapt to different environments.

10Gbps Ethernet Uplink for High-volume Transmission

As to the bandwidth, the WS-1232P offers 10Gbps uplink ports to relieve huge network traffic. Each of the 10G SFP+ slots in the WS-1232P supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With its 10G Ethernet link capability, the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The WS-1232P provides greater bandwidth and powerful processing capacity to make central management more efficient.

Unique PoE Management Features

The WS-1232P has a built-in L2/L4 Gigabit Switching engine and 8 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+, with a total power budget of up to 240W for different kinds of PoE applications. It perfectly meets the power requirements of PoE Wi-Fi access points including dual-band or outdoor high-power AP/CPE with high power consumption. As a managed PoE Switch for stable and reliable wireless AP operation, the WS-1232P features the following intelligent PoE management functions:

  • PD Alive Check
  • Scheduled Power Recycling
  • SMTP/SNMP Trap Event Alert
  • PoE Schedule

Layer 3 Routing Support

The WS-1232P enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for an autonomous system based on link-state. The protocol creates a database for link-state by exchanging link states among Layer 3 switches and then uses the Shortest Path First algorithm to generate a route table based on that database.

IPv4/IPv6 Dual Stack Management Network

The WS-1232P offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having highly-secure, flexible management and simpler networking application. With the support for IPv6/IPv4 protocol and user-friendly management interfaces, the WS-1232P is the best choice for system integrators to migrate network infrastructure from the IPv4 to the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network.

Optimal Redundant Ring for Faster Recovery of Managed Network

The WS-1232P supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, and Spanning Tree Protocol (802.1w RSTP) into customer’s network to enhance system reliability and uptime in harsh environments. In a certain simple ring network, the recovery time could be less than 10ms to quickly bring the network back, thus enabling the management network to keep on operating.

User-friendly Secure Management

For efficient management, the WS-1232P is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WS-1232P offers an easy-to-use, platform-independent management and configuration facility. The WS-1232P supports SNMP and it can be managed via PLANET centralized network management suite or any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the WS-1232P offers Cisco-like command via Telnet or console port and the customer doesn’t need to learn new commands from these switches. Moreover, the WS-1232P offers remote secure management by supporting SSHSSL and SNMPv3 connection which can encrypt the packet content at each session.

Cybersecurity Network Solution to Minimize Security Risks

The cybersecurity feature included protecting the switch management in a mission-critical network virtually needs no effort and cost to install. Both SSH and SSL protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.

Hardware Specifications
Copper Ports 10 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X interface with Port-1 to Port-10
SFP/mini-GBIC Slots 2 x 1/10G BASE-X SFP interfaces with Port-11 to Port-12
PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8
Console 1 x RJ45 serial port (115200 , 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 60Gbps/non-blocking
Throughput [email protected] 64Bytes packet
Address Table 16K entries, automatic source address learning and aging
Shared Data Buffer 16Mbits
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9KB
Reset Button < 5 sec: System reboot > 5 sec: Factory default
LED System:
Fan Alert ( Red ), SYS (Green), PWR (Green)
10/100/1000BASE-T RJ45 Interfaces (Port 1 to Port 10):
1000Mbps LNK/ACT (Green)
10/100Mbps LNK/ACT (Orange)
PoE-in-Use (Orange) (Port 1 to Port 8)
1/10G Mbps SFP Interfaces (Port 11 to Port 12):
1G LNK/ACT (Green)
10G Mbps (Orange)
Power Requirements 100~240V AC, 50/60Hz
Power Consumption (Full Loading) 320 watts/1091.9 BTU (max.)
ESD Protection 6KV DC
EFT Protection 4KV
Dimensions (W x D x H) 330 x 200 x 43.5 mm, 1U height
Weight 2kg
Wireless AP Management
Maximum Managed APs 32
Maximum AP Groups 10
Maximum APs per AP Group 32
Wireless Encryption/Security ■ WEP encryption security
■ WPA Personal / Enterprise (TKIP / AES)
■ WPA2 Personal / Enterprise (TKIP / AES)
■ Enterprise Class 802.1x
AP Auto Discovery Supports AP auto discovery
Dashboard Summarized system overview includes online AP and activated client number
SSID/RF Profile Allows multiple wireless profiles creation and maintenance
Cluster Management Allows AP grouping for bulk provisioning and batch upgrading
Bulk AP Provisioning Supports bulk AP provisioning with user-defined profiles
Bulk AP Firmware Upgrade Supports bulk AP firmware upgrade
Coverage Heat Map Enables real signal coverage of managed AP reflecting on the uploaded zone
maps
Status Monitoring Real-time traffic statistics reporting of AP and activated clients
Graphical Statistics Real-time and historical visibility of traffic flow
Profile Backup/Restore Provides SSID, radio profile backup/restore
SSIDs-to-VLANs Mapping Allows to configure SSIDs-to-VLANs mapping in supported APs
Compatible AP Models ■ Managed AP Series
■ Smart AP E Series
■ Smart AP OE Series
■ Smart AP OW Series
Remarks The supported AP models may be changed after a firmware upgrade.
The following AP models are classified according to their specifications:
[1] Managed AP Series: The AP can be managed in the “Managed AP” mode.
[2] Smart AP E Series: “E” stands for “Enhanced“, meaning indoor smart AP with enhanced features.
[3] Smart AP OE Series: “OE” stands for “Outdoor Enhanced“, meaning outdoor smart AP with enhanced features.
[4] Smart AP OW Series: “OW” stands for “Outdoor Wireless“, meaning outdoor
smart AP/CPE.
Power over Ethernet
PoE Standard IEEE 802.3at PoE Plus, PSE
PoE Power Supply Type End-span
PoE Power Output Per port 54V DC, max. 36 watts
Power Pin Assignment 1/2(-), 3/6(+)
PoE Power Budget 240 watts (max.) @ 25 degrees C
200 watts (max.) @ 50 degrees C
PoE Ability PD @ 7 watts: 8 units
PD @ 15.4 watts: 8 units
PD @ 30.8 watts: 8 units
Layer2 Management Functions
Basic Management Interfaces Console , Web browser, SNMP v1, v2c
Secure Management Interfaces SSH, SSL, SNMP v3
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable/enable
Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port Mirroring TX/RX/Both
Many-to-1 monitor
VLAN 802.1Q tag-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation IEEE 802.3ad LACP/Static Trunk
Supports 6 trunk groups with 4 ports per trunk
QoS Traffic classification based, strict priority and WRR
8-level priority for switching
– Port number
– 802.1p priority
– 802.1Q VLAN tag
– DSCP/TOS field in IP packet
IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control List IP-based ACL/MAC-based ACL
Up to 256 entries
Bandwidth Control Per port bandwidth control
Ingress: 10Kbps~13000Mbps
Egress: 10Kbps~13000Mbps
SNMP MIBs RFC 1213 MIB-II
RFC 2863 IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2737 Entity MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2618 RADIUS Client MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Power over Ethernet MIB
Layer 3 Functions
IP Interfaces Max. 128 VLAN interfaces
Routing Table Max. 128 routing entries
Routing Protocols IPv4 OSPFv2
IPv4 hardware static routing
IPv6 hardware static routing
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX/LX
IEEE 802.3ab 1000BASE-T
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
FRC 3810 MLD v2
RFC 2328 OSPF v2
Environments
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the Flag.

    WS-1232P Datasheet

    Download

    You may also like…