, , , , , ,

Planet WDAP-W750E


Model No: WDAP-W750E

  • Compliant with IEEE 802.11ac wireless technology with data rate of up to 750Mbps
  • One 10/100BASE-TX port and one PoE powered device (PD) port
  • USB charger port for charging most of mobile devices easily
  • European 86-type wall outlet compatibility
  • Multiple operation modes: AP, Gateway, Repeater, WDS
  • WMM (Wi-Fi multimedia) provides higher priority to multimedia transmitting over wireless
  • Coverage threshold to limit the weak signal of clients occupying session
  • Real-time Wi-Fi channel analysis chart and client limit control for better performance


Warranty: 24 Months

All-in-One Manageable Dual-band Wi-Fi Solution for Hotel Industry 
PLANET WDAP-W750E enables the hospitality industry to build a more high-speed wireless network with 802.1Q VLAN and PLANET AP controller. The WDAP-W750E is an 802.11ac Dual Band In-wall Wireless Access Point that conforms to the standard 86-type electrical junction box and supports IEEE 802.3af/at PoE. It is suitable for in-wall installation enabling to integrate the hotel network with its all-in-one interface. The WDAP-W750E also provides stable 2.4GHz and 5GHz wireless signals simultaneously that make access to internet viable in regard to whatever nature of work you are into.

Concurrent Dual Band and 11AC Wireless Range Extension
The WDAP-W750E conforms to IEEE 802.11a/b/g/n/ac Dual Band standard technology; therefore, it can provide a wireless speed of up to 433+300Mbps. With concurrent dual-band Wi-Fi transmission capability, the WDAP-W750E is more flexible than the traditional repeater that only utilizes single band for range extension in that it can quickly and easily extend high-speed 11ac 5GHz and 11n 2.4GHz wireless networks simultaneously.

Easy Deployment with PLANET AP Controller
To expand the capability of in-wall AP, PLANET WDAP-W750E comes with centralized management, enabling the hospitality industry to deploy multiple APs with a single interface of AP controller and reducing repetitive tasks including AP provisioning, AP status monitoring and AP maintenance. In addition, by connecting with PLANET AP controller, PLANET WDAP-W750E helps hoteliers optimize their wireless network within minutes.

Suitable for Any Room Installation without Spoiling Interior Design
Featuring attractive in-wall design, the WDAP-W750E can be firmly installed into the wall via the standard 86 x 86 mm European outlet box, which makes electrical wiring invisible and convenient for room installation without affecting the original interior design. It is ideal for hotels, residences, hospitals and more to establish any kind of wireless network.

Comprehensive Wireless Operation Modes
The WDAP-W750E supports multiple wireless communication connectivities such as AP, Gateway, Repeater, Super WDS (Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP)), allowing users to comprehensively experience various applications.

Easy to Use ON/OFF and USB Charger
Having a good night sleep is what we need in the hotel. It is easy to turn ON/OFF wireless and LED on the front panel of the WDAP-W750E. When you don’t need to use wireless LAN, just press the button to close the wireless and LED power. To provide better services for travelers, the WDAP-W750E comes with a built-in USB 2.0 charger whose output of 5V DC 0.5A power can charge any USB compliant mobile devices, e.g., cell phones, iPads, and other handheld devices. Thus, the WDAP-W750E brings convenience to pedestrians, travelers and other users without having to worry about forgetting to carry an AC adapter.

Hardware Specifications
Interfaces LAN 1 x 10/100BASE-TX RJ45 port
Auto-negotiation and auto MDI/MDI-X
Interfaces PoE Port 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
*IEEE 802.3af/at PD port
Interfaces USB Port USB 2.0, Type A, 5V DC, 0.5A output
Antennas Gain 2 x 2dBi antenna
Button Reset button (Press over 15 seconds to reset the device to the factory default)
LED Indicators Wireless
Dimensions (W x D x H) 86 x 35 x 86 mm
Weight 106 ± 5g
Power Requirements 48V DC IN, 0.5A, IEEE 802.4af/at PoE+
Power Consumption < 5W
Mounting In-wall mount
Wireless Interface Specifications
Standard IEEE 802.11ac
IEEE 802.11n
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control
Media Access Control CSMA/CA
Data Modulation 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
802.11b: DSSS (DBPSK / DQPSK / CCK)
Band Mode 2.4G / 5G concurrent mode
Frequency Range 2.4GHz :
FCC: 2.412~2.462GHz
ETSI: 2.412~2.472GHz
5GHz :
FCC: 5.180~5.240GHz, 5.745~5.825GHz
ETSI: 5.180~5.700GHz
Operating Channels FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 channels)
ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (16 channels)
5GHz channel list will vary in different countries according to their regulations.
RF Power < 20dBm (EIRP)
Receive Sensitivity (2.4GHz) 802.11b
1Mbps: -88dBm
11Mbps: -85dBm
6Mbps: -88dBm
54Mbps: -68dBm
MCS0/MCS8: -68dBm
MCS7/MCS15lMCS7/MCS15: -68dBm
802.11n HT40
MCS0/MCS8: -93dBm
MCS7/MCS15: -75dBm
Receive Sensitivity (5GHz) 802.11a
6Mbps: -92dBm
54Mbps: -75dBm
802.11n HT20
MCS0/MCS8: -91dBm
MCS7/MCS15: -72dBm
802.11n HT40
MCS0/MCS8: -88dBm
MCS7/MCS15: -70dBm
802.11ac VHT20
MCS0: -92dBm
MCS8: -70dBm
802.11ac VHT40
MCS0: -89dBm
MCS9: -65dBm
802.11ac VHT80
MCS0: -87dBm
MCS9: -61dBm
Software Features
LAN Static IP
Supports IP-MAC binding
Wireless Mode
  • Access Point
  • Gateway
  • Repeater
  • WDS (PtP/PtMP)
Channel Width 20MHz, 40MHz, 80MHz
Encryption Security 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Enable/Disable SSID Broadcast
Wireless – filtering of max. 32 MAC addresses
User Isolation
Max. SSIDs 4 per radio
Max. Clients 64 per radio (50 is suggested, depending on usage)
Max. WDS Peers 4
Wireless QoS Supports Wi-Fi Multimedia (WMM)
Wireless Advanced Auto channel selection
5-level transmit power control (100%, 75%, 50%, 25%, 12.5%)
Client limit control, coverage threshold
Wi-Fi channel analysis chart
Fast Roaming
Status Monitoring Device status, wireless client list
PLANET Smart Discovery
DHCP client table
System Log supports remote syslog server
VLAN IEEE 802.1Q VLAN (VID: 3~4094)
SSID-to-VLAN mapping to up to 4 SSIDs
Self-healing Supports auto reboot settings per day/hour
Management Remote management through PLANET DDNS/ Easy DDNS
Configuration backup and restoration
Supports UPnP
Supports IGMP Proxy
Supports PPTP/L2TP/IPSec VPN Pass-through
SNMP v1/v2c/v3 support, MIB I/II, Private MIB
Central Management* Applicable controllers: WAPC-500, WAPC-1000, Smart AP Control(SAPC),
WS-1232P, WS-2864PVR and UNI-NMS.
*Remarks: The feature will be supported through firmware/system upgrade.
Environment & Certification
Temperature Operating: -20 ~ 55 degrees C
Storage: -40 ~ 70 degrees C
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 95% (non-condensing)
Regulatory CE, RoHS

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!

    Please prove you are human by selecting the House.

    WDAP-W750E Datasheet


    You may also like…