, , , , , , ,

ISW-511 – 4-Port 10/100Base-TX + 1-Port 100Base-FX Industrial Fast Ethernet Switch (-10~60 degrees C operating temperature)

Planet
Availability:

Available on backorder


Model: ISW-511

  • 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • 1-port 100Base-FX interface for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-511
  • 1-port 100Base-FX interface for up to 15km (Single-mode fiber 9µm/125µm) on ISW-511S15
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half / full-duplex mode for each copper port
  • High performance Store and Forward architecture
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (Switching Fabric): 1Gbps
  • Integrated address look-up engine, support 2K absolute MAC addresses
  • 1 Mbit on-chip frame buffer
  • Automatic address learning and address aging

          Product Availability : On Order Basis, 4-8 Weeks

New slim type with more practicability and convenience

PLANET has released the ISW-511, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.

Stable Operating Performance under Difficult Environments

The ISW-511 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 can be placed in almost any difficult environment. The ISW-511 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Robust Switch performance

The ISW-511 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface and boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 for fast and reliable data transfer.

All of the RJ-45 copper interfaces in the ISW-511 support 10/100Mbps auto-negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Hardware Specifications
Copper Ports
4 x 10/100Base-TX, auto negotiation, auto-MDI/MDI-XCable
10Base-T : 2-pair UTP Cat. 3, 4, 5cable (100meters, max.)
100Base-TX : 2-pair UTP Cat. 5cable (100meters, max.)
Optical Port
1 x 100Base-FXCable
50/125μm fiberMode
Multi-modeDistance
2kmFrequency
1310nmLaunch Power
Max. -14dBm, Min. -19dBmReceive Sensitivity
I-34.5dBmMax. Input Power
-14dBm
Dimensions (W x D x H) 135 x 97 x 32 mm
Weight 436g
Power Requirements 12~48 VDC,
Redundant power with polarity reverse protection function
Power Consumption / Dissipation 9.1 watts / 31BTU
Installation DIN rail kit and wall mount ear
Alarm Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Switch Specification
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Flow Control Back pressure for half duplex,
IEEE 802.3x Pause Frame for full duplex
Switch Fabric 1Gbps
Throughput 0.74Mpps @ 64Bytes
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet, 10Base-T
IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
IEEE 802.3x Full-duplex flow control
Temperature Operating: -10~60 degrees C
Storage: -40~85 degrees C
Humidity Operating: 5~90%, Storage: 5~90% (non-condensing)
Regulation Compliance FCC Part 15 Class A, CE
Safety UL, cUL
Stability Testing IEC60068-2-32(Free fall),
IEC60068-2-27(Shock),
IEC60068-2-6(Vibration)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the cup.

    Planet ISW-511 Datasheet

    Download

    You may also like…