, , , ,

Planet IMG-120T

Planet

  • Industrial 2-port RS422/485 Modbus Gateway
  • Two RS422/485 ports with 5-contact terminal block
  • Cost effective for RS422/RS485 to Fast Ethernet 10/100BASE-TX application
  • Supports 4-wire RS422 or 2-wire RS485 with 5-contact terminal block
  • 300bps~115200bps baud rate and non-blocking communication
  • Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX standard
  • Supports 10/100BASE-TX RJ45 port with distance up to 100m
  • Built-in IP-based Web interface and telnet interface for remote management
  • Wallmount-type IP40 metal case
  • -40 to 75 degrees C operating temperature

රු44,948.00

Warranty: 36 Months

Economical Solution for Industrial Modbus TCP/RTU/ASCII Network Integration

PLANET has added the Industrial Modbus TCP/IP Protocol to its IMG-120T Industrial-level 2-port RS422/485 Modbus Gateway, an industrial management level product that comes with SCADA/HMI system and other data acquisition systems on the factory floor. Moreover, an industrial IT SNMP network can be upgraded to an Industrial automation Modbus TCP/IP network without any difficulty and extra expense. The IMG-120T offers a flexible network connectivity solution for industrial automation environment. PLANET IMG-120T is a conversion bridge between Modbus TCP/IP Protocol and Modbus RTU/ASCII Protocol. It features a wide operating temperature range from -40 to 75 degrees C and a compact but rugged IP40 metal housing.

The Conversion Bridge that Makes Communications Convenient

As the conversion bridge, the IMG-120T communicates well between any industrial equipment with the Modbus RTU/ASCII Protocol and the administrator workstation that runs the Modbus TCP/IP Protocol. The RS422/485 serial interface of the IMG-120T provides the Modbus RTU/ASCII operation mode and various baud rate options to meet the demand of integration between the Modbus TCP/IP Protocol, Modbus RTU Master/Slave Protocol and Modbus ASCII Master/Slave Protocol.

The advantage of having the IMG-120T is to assist users to build an industrial environment between the Modbus TCP/IP Protocol and the Modbus RTU/ASCII Protocol easily, thus offering an application solution to the industrial control equipment without Ethernet ports. Thus, the industrial control equipment can only control through an industrial PC workstation or industrial control panel.

In addition, the effective integration of Modbus Ethernet devices, Modbus serial equipment or multi Modbus master/slave in an industrial hybrid network brings the following:

  • Master mode supports up to 32 slave TCP connection requests
  • Slave mode supports up to 16 TCP master connections

Remote Management

The IMG-120T makes the connected industrial Modbus RTU/ASCII equipment become IP-based facilities and is able to connect to the Modbus TCP/IP network via its R422/485 serial interface and 10/100BASE-TX RJ45 Ethernet port. It provides a remote web management and telnet Interface for efficient remote network management. The IMG-120T also provides PLANET Modbus Gateway utility tool and supports PLANET Smart Discovery utility to help network administrator to easily get the current IP subnet address information or change the IP subnet address setting of the IMG-120T.

Modbus Serial Port State Monitoring

The IMG-120T shows the details of the total bytes transmitted and received on the RS422/485 serial interface, and the detailed total number of frames transmitted and received on the remote web/telnet management interface. This function allows network administrator to check the status and statistics of the IMG-120T via the single RS422/485 serial interface.

Stable Performance in Hardened Environment Design

The IMG-120T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Its operating temperature ranging from -40 to 75 degrees C allows the IMG-120T to be placed in almost any difficult environment.

The IMG-120T is equipped with a compact IP40-rated metal case that allows wall mounting for efficient use of cabinet space. The IMG-120T also provides an integrated power supply source with wide-ranging voltages (9 to 48V DC) ideally suitable for worldwide operation with high availability applications.

Serial Port
Interface RS422/RS485 x 2
Connector 10-contact terminal block for RS422/RS485
Surge Protection 1KV
Baud Rate (Data Rate) 300bps to 115200bps
Data Bits 7, 8
Parity Type Odd, Even, None, Space, Mark
Stop Bit 1, 2
Flow Control H/W, None
Signals RS422 : Tx+, Tx-, GND, Rx+, Rx-
RS485: Data A (+), GND, Data B (-)
Distance RS422/RS485 for 1200m transfer distance
Operation Mode RTU Master/RTU Slave/ASCII Master/ASCII Slave
Master mode: Supports up to 32 slave TCP connection requests
Slave mode: Supports up to 16 TCP master connection requests
Fast Ethernet Port
Standard IEEE 802.3 10BASE-T standard
IEEE 802.3u 100BASE-TX standard
IEEE 802.3x Full-duplex flow control
Connector RJ45
Distance 100 meters
Hardware
Copper Port 10/100BASE-TX RJ45 TP x1, auto-MDI/MDI-X, auto-negotiation
Serial Port RS422/RS485 x 2
DIP Switch Reset system to factory default
LED Indicators System: Power x 1
10/100BASE-TX Port: Link/Active x 1
RS422/RS485 Serial Port: TX (Transmit) x 2, RX (Receive) x 2
Management Remote Web Management
Remote Telnet Management
PLANET Modbus Gateway Utility
PLANET Smart Discovery Utility
Operation Mode RTU Master
RTU Slave
ASCII Master
ASCII Slave
Dimension (W x D x H) 69 x 100 x 22 mm
Weight 238g
Power Input Connector 2-contact terminal block connector DC power (9-48V) *

*: Please follow the DC power input symbol from the front panel of the IMG-120T — insert positive DC power wire into V+, and negative DC power wire into V-. Otherwise, it will damage the device.

Power Consumption [email protected] (max.)
Installation Wall-mount kit
Mechanical Metal
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T standard
IEEE 802.3u 100BASE-TX standard
IEEE 802.3x Full-duplex flow control
EIA/TIA RS422/485
Regulatory Compliance FCC Part 15 Class B, CE
Stability Testing IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the Star.

    Planet IMG-120T Datasheet

    Download

    You may also like…