, , , ,

NMC-KJSA2-AN-MT – Angled Keystone jack, Cat.6A, Tool-less, Shielded

Availability:

Available on backorder


Model No: NMC-KJSA2-AN-MT

  • Packing Option – 1 in PE Pack
  • Spring-loaded clamps for reliable contact with the patch cord screen
  • Fully shielded version, die-cast zinc-aluminum alloy housing
  • Contacts with 50 micro-inches gold plating

Standard Warranty (Non-Certified) – 5 Years

System Warranty (Certified) – 25 Years

NIKOMAX Fast Termination jacks with angled ports («AN» series) are specically designed for use with a quick termination tool (NMC-FT-TOOL). All you need is to spread the cable to the module contacts, insert it into the tool and simply squeeze the handles. The accurate and high-quality termination in just a single click! The IDC contacts of FT jack are also compatible with punch down tool with 110/KRONE knife. A feature of AN series jacks is the angled ports that allows you to conveniently spred and lay patch cords to the sides and fasten them to the vertical cable organizer. This solution does not require the installation of standard cable management units, saving every third unit in cabinet. AN series jacks are only compatible with NMC-RP24-BLANK-AN-1U-MT patch panel. NMC-KJSA2-AN-MT (Cat.6A), are made in fully shielded, zinc-aluminum alloy housing. After install, a shielded cable will be safely locked between a strain relief on the jack cover and a clip from the bottom, providing a full grounding with good electrical contact with the jack body. On the strain relief there is also a mount for the grounding wire.

Category

6A

Bandwidth, MHz

500

Connection style

Fully shielded

Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C

Warranty

5 years – extended; 25 years – as part of the certified NIKOMAX SCS

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

FT-TOOL fast-termination tool or 110 / KRONE knives

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, compliant to UL94V-0

Installation

Patch panels, surface mount box, faceplate

Color

Metallic (nickel)

Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)

Format

Keystone

Housing material

Zinc-aluminum alloy

Dimensions (WxHxD), mm

17х19х40

Packaging

Individual – Plastic bag

Do you have a question?

Drop us a line by compiling the form below. We will be more than happy to reply to any of your questions!










    Please prove you are human by selecting the car.

    NMC-KJSA2-AN-MT Datasheet

    Download