General
|
Product Code |
ISR4431-DNA |
Description |
Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IPB) with DNA sub |
Aggregate Throughput (Default) |
500 Mbps |
Aggregate Throughput (Performance License) |
1 Gbps |
Aggregate CEF Only Throughput (Boost License) |
Over 4Â Gbps |
Total onboard WAN or LAN 10/100/1000 ports |
4 |
Total onboard WAN or LAN 10Gbps ports |
N/A |
RJ-45-based ports |
4 |
SFP-based ports |
4 |
Enhanced service-module slots |
0 |
Doublewide service-module slots |
0 |
NIM slots |
3 |
OIR (all I/O modules) |
Yes |
Onboard ISC slot |
1 |
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) |
N/A |
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) |
N/A |
Default memory DDR3 ECC DRAM (data plane) |
2 GB |
Maximum memory DDR3 ECC DRAM (data plane) |
2 GB |
Default memory DDR3 ECC DRAM (control/services plane) |
4 GB |
Maximum memory DDR3 ECC DRAM (control/services plane) |
16 GB |
Default flash memory |
8 GB |
Maximum flash memory |
32 GB |
External USB 2.0 slots (type A) |
1 |
USB console port -type B mini (up to 115.2 kbps) |
2 |
Serial console port – RJ45 (up to 115.2 kbps) |
1 |
Serial auxiliary port – RJ45(up to 115.2 kbps) |
1 |
Power-supply options |
Internal: AC, DC, and PoE |
Redundant power supply |
Internal: AC, DC, and PoE |
Power Specifications
|
AC input voltage |
100 to 240 VAC autoranging |
DC Input Voltage
Input Voltage
Input Current |
48–60 V
12 A Max |
AC input frequency |
47 to 63 Hz |
AC input current range, AC power supply (maximum) |
3 to 1.3 A
|
AC input surge current |
60 A peak and less than 5 Arms per half cycle |
Typical power (no modules) (watts) |
65 |
Maximum power with AC power supply (watts) |
250 (no PoE) |
Maximum power with DC power supply (watts) |
437 (no PoE) |
Maximum power with PoE power supply (platform only) (watts) |
500 with PoE redundant
1000 with PoE boost no redundancy |
Maximum endpoint PoE power available from PoE power supply (watts) |
250 W with optional redundancy |
Maximum endpoint PoE power capacity with PoE boost (watts) |
500 W no redundancy |
Dimensions(H x W x D) |
1.73 x 17.25 x 19.97 in(43.9 x 438.15 x 507.2 mm) |
Rack height |
1 Rack Units (1RU) |
Rack-mount 19in. (48.3 cm) EIA |
Included |
Included |
Optional |
Wall-mount |
Yes |
Airflow |
I/O side to bezel side |
MTBF (Hours) |
512970 |
Environmental Specifications
|
Temperature |
32º to 104ºF(0 to 40ºC) |
Altitude(China) |
0–6,560 ft.(0–2,000 m) |
Altitude(Rest of the world) |
0–10,000 ft.(0–3,050 m) |
Short Term Temperature upto 6560ft per NEBS GR-63-CORE |
N/A |
Relative humidity |
5% to 85% |
Short-term humidity |
5% to 90% not to exceed 0.024 kg water/kg of dry air |
Acoustics:Sound pressure(Typical/
maximum) |
54.3/79.1 dBA |
57.2/80.8 dBA |
57.2/80.8 dBA |
Nonoperating Conditions
|
Temperature |
-40 to 158ºF(-40 to 70ºC) |
Relative humidity |
5% to 95% |
Altitude |
15,584 ft (4750m) |
Regulatory and Compliance
|
Safety |
UL 60950-1
CAN/CSA
C22.2 No.
60950-1
EN 60950-1
AS/NZS
60950-1
IEC 60950-1 |
EMC |
47 CFR, Part 15
ICES-003
Class A
EN55032
Class A
CISPR32
Class A
AS/NZS CISPR 32
Class A
VCCI V-3
CNS 13438
EN 300-386
EN 61000 (Immunity)
EN 55024, CISPR 24
KN22, KN24 |
Cisco IOS XE Software
|
Protocols
|
IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced IGRP (EIGRP), Border Gateway Protocol (BGP), BGP Router Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast sparse mode (PIM SM), PIM Source Specific Multicast (SSM), RSVP, CDP, ERSPAN, IPSLA, Call Home, EEM, IKE, ACL, EVC, DHCP, FR, DNS, LISP, OTV[6], HSRP, RADIUS, AAA, AVC, Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IP sec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE802.1ag, and IEEE802.3ah
|
Encapsulations
|
Generic routing encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), Serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE)
|
Traffic management
|
QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing, and NBAR.
|
Cryptographic Algorithms
|
Encryption: DES, 3DES, AES-128 or AES-256 (in CBC and GCM modes); Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit); Integrity: MD5, SHA, SHA-256, SHA-384, SHA-512
|
Telecom
|
TIA-968-B CS-03 ANSI T1.101 ITU-T G.823,G.824 IEEE 802.3 RTTE Directive Homologation requirement s vary by country and interface type.
|
There are no reviews yet.